2005 Mercedes SL65 AMG Biturbo (very Rare)

16k miles, 5 yr old car.
Being Silver it was reasonably simple to bring back the luster
of the paint.


The Process

--Chemical Guys Maxi Suds II
--Microfiber Washmitt

Wheels and Tires:
--P21S Gel Wheel Cleaner
--Detailed Image's Wheel Brush
--Detail Brush
--Meguiars Boars Hair Brush

Engine Bay/Door Shuts:
--P21S Total Auto Wash for door shuts and engine bay.
--Meguiars Boars Hair Brush

---Clay Magic's Blue Claybar and Meguire's Final Inspection for lubrication.

--Citrus based adhesive remover & lacquer thinner on lower panels to remove road tar & road paint.

--Menzerna Micro Polish PO85RD
--Menzerna Full Molecular Jacket
--Chemical Guys' 5050 carnuaba wax

--Lake Country foam pad

--Optimum Leather Conditioner

Plastic- Engine Bay
-- Fade 2 Black detail spray
-- Bare Bones (undercarraige protectant)

--Ultra Plush Detailing Microfiber Towels
--Meguiars Microfiber towels

--Milwauke HD Polisher 5440 0-2800 RPM

--Stoner Invisible Glass

Other products were used during this process.



Incredibly dirty. It took 75 minutes alone to clean the rims, all the way through front to back.

Engine Bay, pre-detail

Detailing in the rain. Pre-washing)

Pre interior conditioning/detailing.

Example of debris removed from paint by Blue claybar. This is from a section of the hood 2" by 1'.
In order to safely clean the entire surface of this Mercedes 3 pieces of Blue claybar were required.

Allowing 1st coat of Menzerna Full Molecular Jacket sealant to cure.

2nd application of Chemical Guys 5050 Carnuaba wax.

Very overcast and rainy day. Even still the reflections are beautiful.

Engine Bay detailed.



Slightly blurry shot due to low light. (sorry).
Conditioned leather and console.


Wheels cleaned front to back.



Winter 2010 Exterior Special with Leather Conditioning.

Extremely dirty vehicle, rims were unbelievable. Brake dust had cooked onto the metal.

It takes quite a while to perform such a detail.

Each layer of sealant and carnuaba wax needed to cure for at least 20-30 minutes.
4 coats.

The clay procedure took 1.5 hours alone because of the enormous amount of debris on the paint.
It was critical to pick out the contaminants on the clay and fold it up to 2 times,
then replace it with a fresh piece.
3 portions of clay in all.


Even in the rain and being overcast, the result is exceptional.


Isn't this what you want for your car?

We put our reputation online